| |
Frequency Range (-10 dB) |
70 Hz to 20 kHz |
| |
Frequency Response (+/-3 dB) |
95 Hz - 19 kHz |
| |
Power Rating2 |
100W Continuous Program (2 hrs) |
| |
Maximum Input Voltage: |
17.2 V RMS (2 hrs), 34.4 V peak |
| |
Maximum SPL3 |
103 dB ave. Continuous Pink Noise (109 dB peak) |
| |
Sensitivity4 |
86 dB, 1W/1m (ave. 100 Hz – 10 kHz) |
| |
Coverage Angle5 |
100° x 100° |
| |
Directivity Factor (Q) |
5.8 (averaged 1kHz – 16kHz) |
| |
Directivity Index (DI) |
7.2 dB (averaged 1kHz – 16kHz) |
| |
Nominal Impedance |
8 ohms |
| |
Crossover Type |
2nd order low-pass, 2nd order high-pass |
| |
Recommended Protective High-Pass6 |
70 Hz high-pass (24 dB/oct) |
| |
Low Frequency Driver |
76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. |
| |
High Frequency Driver |
13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former. |
| |
Enclosure Material |
High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance. |
| |
Grille |
Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-23WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing. |
| |
Installation |
InvisiBall™ wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-23UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel. |
| |
Environmental |
IP-44 per IEC529 (IP-55 when installed with the optional MTC-23WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-23WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments. |
| |
Termination |
Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection. |
| |
Agency Rating |
ROHS-compliant |
| |
Colors |
Black (RAL9004) or white (-WH, RAL9016) |
| |
Dimensions (H x W x D)7 |
200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in); 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket. |
| |
Net Weight |
1.6 kg (3.4 lbs) |
| |
Shipping Weight |
3.5 kg (7.6 lbs) for the pair-pack (for 2 speakers), 11.0 kg (24.3 lbs) for master-pack (for 6 speakers) |
| |
Included Accessories |
InvisiBall™ wall-mounting system, 4 mm x 80 mm hex key |