Specifications
Type: Electret Condenser
Frequency Response: 20Hz - 20kHz
Polar Pattern: Half-Cardioid (cardioid in hemisphere above mounting surface)
Impedance: 146 Ohms
Sensitivity (at 1kHz, open circuit voltage): -48.5dBV/Pa (3.8mV) (1 pascal = 94dB SPL)
Maximum SPL (1kHz a 1% THD): 1,000 Ohm load: 151dB, 2,500 Ohm load: 155dB
Signal-to-Noise Ratio (referenced at 94dB SPL at 1kHz): 64dB
Dynamic Range (at 1kHz): 1,000 Ohm load: 121.5 dB / 2,500 Ohm load: 125.5 dB
Common Mode Rejection (20Hz to 20kHz): >55dB
Clipping Level (20Hz - 20kHz at 1% THD): 1,000 Ohm Load: 7.50dBV / 2,500 Ohm load: 12.5dBV
Self Noise (Typical, equivalent SPL, A-weighted): 29.5 dB SPL-A
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight: Net: 470g (16.6oz)
Frequency Contour Switch: 7dB of attenuation centered at 400kHz
Connector: Three-pin professional audio (XLR), male, balanced
Power Requirements: 11-52 Vdc phantom power, 5.6mA